|
Post by brucie on Feb 13, 2015 16:19:15 GMT
Wondering if anyone can tell me somewhere I can get my T5 casing repaired.
One of the cylinder head bolts has stripped its thread in the casing and it keeps turning as I try to torque up the cylinder head.
It has originally been fixed with a helicoil and thats no longer anygood. Hole looks to big to have a timesert put in so looking for somewhere at worst case would be able to weld it up and re-tap it.
I stay in Largs and not bothered about travelling too far to get it fixed as it needs to get done.
Cheers Bruce
|
|
|
Post by stevie on Feb 14, 2015 10:12:23 GMT
Wondering if anyone can tell me somewhere I can get my T5 casing repaired. One of the cylinder head bolts has stripped its thread in the casing and it keeps turning as I try to torque up the cylinder head. It has originally been fixed with a helicoil and thats no longer anygood. Hole looks to big to have a timesert put in so looking for somewhere at worst case would be able to weld it up and re-tap it. I stay in Largs and not bothered about travelling too far to get it fixed as it needs to get done. Cheers Bruce Drop it off at my house m8 I will try and weld it for you not promising if it will work tho Stevie Adair 25 hallidale crescent , deanpark , Renfrew , pa4 0ya
|
|
|
Post by stevie on Feb 14, 2015 10:14:10 GMT
You will need to drill and tap it yersel but
|
|